Showing 1–16 of 49 results
The LED450-T-TS Admore light kit has been custom designed to fit the GIVI E450 top case. Each kit contains a single high intensity LED light board that fits perfectly behind the center red lens of the E450 case. The LED light board is also connected to two (2) strips (one right, one left) of nine…
AdMore Lighting has developed an innovative LED light kit with mini controller that is easy to install and significantly enhances your visibility on the road and the good looks of the GIVI E470 top case. Each kit contains three high intensity LED light strips that fit perfectly behind the original red lenses of the E470…
This light kit has been custom designed to fit the GIVI E52 top case. The LED light kit operates similarly to the LED360/460-T light kit. Each kit contains two high intensity LED light panels that fit perfectly in the stock GIVI light cut-outs of the E52 case (no modifications required!). Each LED panel is also…
Includes: – 2 high powered LED light strips – 2 high powered LED light panels – 1 mini controller – wiring – weatherproof quick-disconnect connectors – and detailed instructions with guiding pictures Product note: Running light and enhanced brake light output only does not have signal function cabability
Includes:– 1 high powered LED printed circuit board– 1 mini controller– wiring– weatherproof quick-disconnect connectors– detailed instructions with guiding pictures
What’s in the box: Flat switch mounting plate Angled switch mounting plate M5 & M6 hardware kit DENALI 2.0 LED Auxiliary Lighting Guide Designed specifically for motorcycles the DENALI 2.0 LED TriOptic auxiliary lights with DataDim technology maximize visibility in an extremely durable efficient compact yet very powerful package. The DENALI 2.0 product line carries…
What’s in the Box: (1) 48in B6 & DRL Harness Extension
This wiring adapter enables plug-&-play connection between our standard DialDim Lighting Controller and the Ducati DesertX. To install, simply connect the white connector to our DialDim Controller and the remaining connectors in line at the DesertX headlight, horn, and turn signal connectors. Click to learn about all of the innovative features and settings in our DialDim Lighting Controller. Instruction Manual…
This wiring adapter provides plug-&-play access to the switched power accessory circuit on the Ducati DesertX. A small 2-pin JWPF connector is located under the DesertX windscreen right next to the headlight connector. Simply remove the factory dummy plug and plug in this adapter to create a clean 12v accessory trigger wire that will turn on/off with…
Compatible with all GEN II DENALI CANsmart Controllers, no wire tapping or other modifications are necessary, just plug directly into the circuits of the CANsmart to send the signals from your controller to the T3 Lights. This harness is designed to power a set of four T3 lights; two rear T3s & two front T3s, but can…
The T3 is a unique and innovative approach to the common turn signal, blending white visibility lighting, red brake lighting and amber turn signal lighting into one modular system. The front T3 turn signal pods feature super bright white running lights that switch to amber when your turn signal is activated, while the feature super bright…
Use this DENALI T3 Wiring Adapter for plug and play connection of DENALI Front T3 Lights to Harley-Davidson Motorcycles. The adapter simply plugs inline between the factory front turn signals.
This wiring adapter plugs in-line at the factory turn signal connectors to enable plug-&-play connection of aftermarket turn signals to the Ducati DesertX. The green wire provides the turn signal output and the black wire is ground. If you are installing DENALI switchback turn signals, use the included posilocks to connect the black and green wires to the…
This vehicle specific T3 Signal Pod mount allows you to mount DENALI Front T3 Modular Switchback Signal Pods in the optimum location on your Kawasaki KLR650. This kit includes beefy powder coated steel brackets with all necessary mounting hardware. Click to check out our pre-configured bundle that includes this mounting kit, the front T3s and the wiring adapter.
Simple installation using pre-molded cutouts on the topcase; requires some disassembly of the topcase access panels using a screwdriver & tapping existing brakelight wires. Note: hand-free connector mounts on the base of the topcase and is compatible ONLY with Givi or SW-MOTECH-manufactured topracks. Using this brakelight kit with the Five Stars topracks precludes use of…
Simple installation using pre-molded cutouts on the topcase; requires some disassembly of the topcase access panels using a screwdriver & tapping existing brakelight wires. Note: hand-free connector mounts on the base of the topcase and is compatible ONLY with Givi or SW-MOTECH-manufactured topracks. Using this brakelight kit with the Five Stars topracks precludes use of…
No products in the cart.